Composite Protect Waterproof Tape - 20METERS

Composite Everything waterproof Tape completely protects and seals your new or existing deck frame, protecting from water rot, moisture rot and frame weathering.

SOLVING PROBLEMS – DECK FRAME WEATHERING

Exposure to the elements outdoors can result in significant deck frame weathering.  The most common area for this damage to occur is where the deck boards come in contact with the deck substructure.  Protect your deck substructure with Composite Everything Waterproof Tape.

BENEFITS OF USING COMPOSITE PROTECT WATERPROOF TAPE

• Watertight
• Air- and smoke-tight
• Easy release
• Stickiness
• UV-stable
• Self-sealing
• Tape can be easily overlapped without added any significant height which could interfere with the deck board heights
• Easy to slide boards along taped joists when installing
• If screws are removed, no residue is left on the screw
• Tape doesn’t stick to itself on the adhesive side – no wastage

WHAT IS COMPOSITE PROTECT WATERPROOF TAPE?

Suitable to be used with both traditional timber decking and also the more advanced composite decking, Deck Tape® will protect any timber decking substructure.  When using a composite deck board, more of the moisture will be absorbed into the substructure as it will drain off the deck boards.  Higher amounts of moisture will mean that the frame will rot faster if not sealed properly.

TO WATCH WHY DECK FRAME PROTECTION IS IMPORTANT CLICK HERE 

WHY COMPOSITE PROTECT WATERPROOF TAPE?

COMPOSITE PROTECT WATERPROOF TAPE is a non-butyl tape.

Non-Butyl tapes are particularly suitable for this application as they are completely UV stable and keep their integrity for longer.  This means that they have many advantages over both butyl and asphalt tapes.

In addition to this, it is stable from -40C to +93C with no cracking, peeling or strength loss.

WHERE IS COMPOSITE PROTECT WATERPROOF TAPE APPLIED?

Joist Protection

Simply applying a strip of COMPOSITE PROTECT WATERPROOF TAPE along the top of the joists as a ‘cap’ (rather than a wrap) protects the timber as it creates a strong seal from any moisture.  50mm COMPOSITE PROTECT WATERPROOF TAPE works particularly well on standardised 2 inch timber as it acts as a ‘cap’ (slightly overlapping the edge of the timber) rather than a wrap.  This prevents any moisture sitting on these flat surfaces and slowly rotting away the timber.

COMPOSITE PROTECT WATERPROOF TAPE can be applied to joists in advance to the deck boards being fitted – It doesn’t deteriorate or affect the benefits and qualities that the tape brings to the deck.

Joist Hanger Protection

Traditionally the coating on the metal would have slowly corroded away the metal and brought weakness in.  However, by simply applying a layer of Deck Tape® this prevents the breaking down of the treatments so the subframe of your deck maintains its integrity.

Posts

Use COMPOSITE PROTECT WATERPROOF TAPE on timber posts to create a waterproof and moisture-tight seal. Particularly useful for fence posts and any other timber that has contact with the ground.

Cut Ends

Generally this is a particularly weak spot for the moisture to start rotting the timber since there will not be any treatment on this part as it has been cut to size.  Using one layer of COMPOSITE PROTECT WATERPROOF TAPE will completely seal it off from all moisture and water-rotting or weathering.

Around fasteners

Apply a layer of COMPOSITE PROTECT WATERPROOF TAPE between the galvanised fixings and treated timber to prevent the fixing from corroding.